USS Independence |
|
| Career (US) | |
|---|---|
| Name: | USS Independence |
| Awarded: | 14 October 2005[1] |
| Builder: | Austal USA[1] |
| Laid down: | 19 January 2006[1] |
| Launched: | 26 April 2008[1] |
| Christened: | 4 October 2008 |
| Commissioned: | 16 January 2010[2] |
| Homeport: | San Diego[1] |
| Status: | in active service, as of 2011 |
| General characteristics | |
| Class and type: | Independence-class littoral combat ship |
| Displacement: | 2,176 tons light, 2,784 tons full, 608 tons deadweight[1] |
| Length: | 127.4 m (418 ft)[1] |
| Beam: | 31.6 m (104 ft)[1] |
| Draft: | 13 ft (3.96 m)[1] |
| Propulsion: | 2× MTU Friedrichshafen 20V 8000 Series diesel engines, 2x General Electric LM2500 gas turbines,[3] 2x American VULKAN light weight multiple-section carbon fiber propulsion shaftlines, 4x Wärtsilä waterjets,[4] retractable bow-mounted azimuth thruster, 4× diesel generators |
| Speed: | 44 knots (51 mph; 81 km/h)[5] |
| Range: | 4,300 nm at 18 knots[6] |
| Capacity: | 210 metric tons (206 long tons, 231 short tons) |
| Complement: | 40 core crew (8 officers, 32 enlisted) plus up to 35 mission crew |
| Sensors and processing systems: |
|
| Electronic warfare and decoys: |
|
| Armament: |
|
| Aircraft carried: | |
USS Independence (LCS-2) is the lead ship for the Independence class of littoral combat ships. She will be the sixth ship of the United States Navy to be named for the concept of independence. The design was produced by the General Dynamics consortium for the Navy's LCS program, and competes with the Lockheed Martin-designed Freedom class.
Independence is intended as a small assault transport that can take on various capabilities with the installation of mission modules. The ship is a trimaran design that can make more than 40 knots (74 km/h; 46 mph), and was delivered to the Navy at the end of 2009.
Contents |
The design for Independence (LCS 2) is based on a high-speed trimaran (Benchijigua Express) hull built by Austal (Henderson, Australia). The 418-foot (127-meter) surface combatant design requires a crew of 40 sailors. Although the trimaran hull increases the total surface area, it is still able to reach sustainable speeds of about 50 knots (60 mph; 90 km/h) with a range of 10,000 nautical miles (19,000 km).
With 11,000 cubic meters of payload volume, it was designed with enough payload and volume to carry out one mission with a separate mission module in reserve, allowing the ship to do multiple missions without having to be refitted. The flight deck, 1,030 m2 (11,100 sq ft), can support the operation of two SH-60 Seahawk helicopters, multiple UAVs, or one CH-53 Sea Stallion-class helicopter. The trimaran hull will allow flight operations up to sea state 5.[9]
The Independence carries a default armament for self-defense, and command and control. However unlike traditional fighting ships with fixed armament such as guns and missiles, tailored mission modules can be configured for one mission package at a time. Modules may consist of manned aircraft, unmanned vehicles, off-board sensors, or mission-manning detachments.
The interior volume and payload is greater than some destroyers and is sufficient to serve as a high-speed transport and maneuver platform. The mission bay is 15,200 square feet (1,410 m2), and takes up most of the deck below the hangar and flight deck.
In addition to cargo or container-sized mission modules, the bay can carry four lanes of multiple Strykers, armored Humvees, and their associated troops. An elevator allows air transport of packages the size of a 20-foot-long (6.1 m) shipping container that can be moved into the mission bay while at sea. A side access ramp allows for vehicle roll-on/roll-off loading to a dock and allows the ship to transport the Expeditionary Fighting Vehicle.[10]
The habitability area is located under the bridge where bunks for ships personnel are situated. The helm is controlled by joysticks instead of traditional steering wheels.[11]
The Independence also has an integrated LOS Mast, Sea Giraffe 3D Radar and SeaStar Safire FLIR. Side and forward surfaces are angled for reduced radar profile. In addition, H-60 series helicopters provide airlift, rescue, anti-submarine, radar picket and anti-ship capabilities with torpedoes and missiles.
The Raytheon Evolved SeaRAM missile defense system is installed on the hangar roof. The SeaRAM combines the sensors of the Phalanx 1B close-in weapon system with an 11-missile launcher for the Rolling Airframe Missile (RAM), creating an autonomous system.[12]
Northrop Grumman has demonstrated sensor fusion of on and off-board systems in the Integrated Combat Management System (ICMS) used on Independence.[13]
Independence has an Interior Communications Center that can be curtained off from the rest of bridge instead of the heavily protected Combat Information Center found on Navy warships.[14]
Austal claims that the Independence will use a third less fuel than Freedom, but the Congressional Budget Office found that fuel would account for 18 percent or less of the total lifetime cost of Freedom. While it was unable to judge the fuel usage of Independence, the higher purchase price of Independence would dominate its lifetime costs.[15]
The contract was awarded to General Dynamics in July 2003.[16] The contract to build her was then awarded to Austal USA of Mobile, Alabama, on 14 October 2005 and her keel was laid down on 19 January 2006. Delivery to the United States Navy was scheduled for December 2008.
The originally planned second General Dynamics ship (LCS-4) was canceled on November 1, 2007.[17] On May 1, 2009, a second vessel was reordered by the Navy, the Coronado (LCS-4). The keel was laid on December 17, 2009,[18] with delivery scheduled for May 2012.[19]
The Navy currently plans a new bidding process with the FY2010 budget between Lockheed Martin and General Dynamics for the next three littoral combat ships, with the winner building two ships and the loser only one.[20] USS Independence was christened October 5, 2008 by Doreen Scott, wife of 10th Master Chief Petty Officer of the Navy Terry D. Scott.[21]
Austal has proposed a much smaller and slower trimaran, called the Multi-Role Vessel or Multi-Role Corvette. Though it is only half the size of their LCS design, it would still be useful for border protection and counter piracy operations.[22] Navy leaders said that the fixed price competition offered the Austal design an equal shot, in spite of its excess size and cost and limited service.[23]
The development and construction of Independence as of June 2009 was running at 220% over-budget. The total projected cost for the ship is $704 million. The Navy had originally projected the cost at $220 million.[24] Independence began builder's trials near Mobile, Alabama on July 2, 2009, three days behind schedule because of maintenance issues.[25]
In response to problems with the propulsion plant, the ship experienced a leak in the port gas turbine shaft seal, General Dynamics resequenced the builder's trials to test other systems until this was fixed.[26] The ship completed builder's trials on October 21, 2009[27] and acceptance trials on November 19, 2009.[28]
On December 9, 2009 the Navy announced that the ship had completed its first INSURV inspection. The inspection found 2,080 discrepancies, including 39 high-priority deficiencies, but concluded that all could be resolved before the Navy accepts the ship as scheduled. The ship was delivered to the Navy on December 17, 2009. On December 18, the Navy officially accepted custody of the ship.[18] However the ship was found to be incomplete and a second round of acceptance trials was scheduled for 2011.[29]
The ship was commissioned on January 16, 2010 in Mobile, Alabama[30] and completed her maiden voyage in April 2010.[31]
In 2010 the Navy asked for an additional $5.3 million to correct problems found in the sea trials.[32]
In 2011 the corrosion problem was found to be even worse than expected and repair will require time in a drydock to completely remove the water jets.[33] In response Austal blamed the US Navy for not properly maintaining the ship.[34][35] However the Navy replied that the electrical insulation had been improperly installed during construction.[36] Later Austal said it had found a fix for the problem that would be tested on the third Austal LCS ship.[37]
Galvanic corrosion is a problem encountered on naval vessels at least since the first iron-hulled warship, the USS Michigan in 1844, and is easily managed through regular maintenance and sacrificial cathodic protection. In the case of the Austal-General Dynamics LCS-2, galvanic corrosion caused by an aluminum hull in contact with stainless steel propulsion system housing in the presence of sea water, not to mention other electrical currents not yet fully isolated, should have been easily predicted and prevented. Funding for a cathodic protection system on this warship design appears to have been deleted, but a press release from the U.S. Senate Committee on Armed Services regarding the markup of the FY12 National Defense Authorization Act appears to restore some funding.[38]
Seven United State Senators have sent a letter to the Department of Defense questioning the management of the corrosion problems of Independence.[39]
In July 2011, Navy Public Information Officer Christopher G. Johnson said that a "cathodic protection system" would be installed on the ship.[40]
The USS Independence inspired the character Tony Trihull in the film Cars 2.
|
||||||||
